Handbrake and Prop Shaft

Got a few bits and bobs finished today by changing the fuel outlet hose connector from the banjo bolt that comes as standard with the Bosch 044 pump to a Torques UK inline check valve with AN-6 outlet and then onto an AN-6 to 10mm barbed hose connector from Merlin Motorsports. I also changed the P-clip for the fuel filter …

Fuel Pump

Having roped a couple of mates in to help lift off the body shell it was time to install the fuel pump and filter. There seemed to be quite a lot of chat on the forums relating to the fuel system, the most important bits summarised as below: use a mechanical pump at the engine if using a carburettor use …